Intplus FlexWATCH 1110, Руководство пользователя

Страница: 98 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
98
)
After creating ‘Base directory’ in your FTP server, you should verify
whether you get the right permission to read and write image files in the
directory. To do this, simply try to upload and download any files onto
'Base directory'.
C. Base File Name: Input
‘
Base file name
’
which will be given to the FTP images.
D. User ID & Password: Input the user ID and PW of your FTP server.
E. Connection Mode: Select
‘
Active
’
mode.
(If your FTP server is placed within a Firewall-network environment, you need to select
‘
Passive
’
mode and configure your FTP server as
‘
Active
’
mode. Please contact your
network administrator for more details.)
F. Option (Directory Name): Only when you want to enable this function, you need to configure
it at the next step 5). Thus, there is nothing to set up at this step.
G. Option (File Name): Select
‘
File Name
’
option only when you want to enable it.
H. Click
‘
Save
’
button.
)
’Base directory’ and ’Base file’ name must be registered on this
configuraion, while ’Directory and File option’ is only optional function
which you can make use of or not.
5)
Go to ‘FTP (Periodic)’ menu again. After you select ‘Directory Name’ on option table,
click ‘Save’ and ‘Make Directory’ button in order.
)
You can select only one ‘directory name’ on the option table.
If you want to make another directory option, you need to reset it from
step 5) to step 6). After that, FTP images will be stored in the newly
created sub-directory under ‘Base directory’.
6)
Go to ‘Advanced Services’ menu. And click ‘Apply’ button under the Status bar to
apply the new service configuration.
WARNING!!!
Once you finish or change above configuration, you must click ’Apply’ button
on the ’Advanced Services’ menu. Otherwise, new configurations will not be
applied at all.
7) Close the window of ‘Admin menu’. When ‘Save configuration’ window pop-up, click
‘Save Configuration’.
- INTPLUS [2005] -