Intplus FlexWATCH 1110, Руководство пользователя

Страница: 192 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
81
-
Total number of Pre + Post alarm for e-mail per channel <10 frames for
channel.
-
Pre alarm frame for FTP & e-Mail and Alarm buffer service shall be done
within Total pre-alarm buffer size
-
Post alarm for FTP & e-mail has nothing to do with Total buffer size.
-
Post alarm for Alarm buffering service can be done within the Memory
allowed by Alarm buffering service size.
-
The ratio of sum in the Buffer Calculator should be less than 100%.
1)
Go to Advance service mode in the Service configuration section
2) Go to Buffering service mode
3) Click “Buffer Calculator” button to run the calculator
4) Pre configure pre/post alarm buffer for each service. This previous window can be
open till you manually disclose the Window. Thus, you can refer to this table when you
configure e-mail, ftp or Alarm buffering service configuration.
2
Service Condition
Sophisticated advanced services can be done by lots of serviced conditions provides by
the system. To correctly set up the system use must has good understanding about the
service condition as well.
e-mail, FTP, Sensor notification and Alarm output device control function requires service
condition set up to activate the function. Note that the basic logic for the service
condition set up is same for all of other options.
- INTPLUS [2005] -