13
DHCP_IP_START=192.168.42.2
# IP pool end address of DHCP server
DHCP_IP_END=192.168.42.6
# Wifi channel number, set 0 to use Auto Channel Selection
AP_CHANNEL=0
# Maximum number of stations allowed in station table
AP_MAXSTA=5
# If you say yes here, all WPA/WEP settings will be ignored
AP_PUBLIC=no
# WPA Passphrase (8 ~ 63 characters)
AP_PASSWD=HDE012345
System Menu:
With SYSTEM menu icon highlighted, press OK button to enter system settings sub-menu. Use the
UP or DOWN button to scroll through the sub-menu and press OK button to select from TV SYSTEM,
UPSIDE DOWN, DIGITAL ZOOM, LCD OFF, VOLUME, LANGUAGE, BEEP SOUND, FIRMWARE
VERSION, TIME SETUP, FORMAT, RESET SYSTEM, and AUTO POWER OFF. After selecting sub-
menu, use UP or DOWN to scroll through choices, press OK button to select and press MENU button
to go back to main screen.
1) TV SYSTEM:
This setting configures the video file for playback on either an NTSC or PAL system
device.
2) UPSIDE DOWN:
This setting allows video to be played back in correct orientation for videos that
are recorded with camera mounted upside down. Setting choices are ON to activate and OFF to
deactivate feature.
3) DIGITAL ZOOM:
This setting allows digital zoom feature for either video or photo mode to be
activated. When digital zoom is activated, use the UP button to zoom in and the DOWN button to
zoom out. The setting choices are OFF, 10X and 60X.
4) LCD OFF:
This setting allows LCD to stay on or turn off after a specified time; 30 seconds, 1
minute, or 3 minutes. Use this feature to conserve battery power. Select OFF to disable function and
leave screen turned ON
5) VOLUME:
This setting allows Beep Sound volume to be adjusted from 0 to 5.
6) LANGUAGE:
This setting allows MENU language to be selected between English, Chinese
(Traditional), Chinese (simplified), Japanese, French, German, Dutch, Portuguese, Spanish, Korean
and Italian.
7) BEEP SOUND:
This setting turns Beep Sound ON or OFF.
8) FIRMWARE VERSION:
This indicates installed firmware version. Please note when updating
firmware in order to confirm new firmware has been installed.
9) TIME SETUP:
This setting allows current date and time to be set. With sub-menu item highlighted,
press OK button to enter setting. Press UP or DOWN button to change number and press MODE
button to scroll to next. When done, press OK button to confirm and go back to sub-menu.
10) FORMAT:
This feature allows Micro SD card to be formatted.
WARNING, formatting card will
erase all data!
Press OK to enter function. Press UP or DOWN button to highlight YES and press
OK to select. Press UP or DOWN button again to highlight YES and press OK to execute format.
