www.inline-info.com
10
11
13. SUPPORTED FORMAT
The tables below show the supported audio output and video resolutions. If there are any problems with no image or abnor-
mal display, suggest using a standard display mode from the list.
A. AUDIO FORMAT
Dolby:
Dolby Digital 5.1 ch/Dolby Digital Plus/Dolby Digital Pro-Logic/Dolby TrueHD/Dolby Atmos
DTS:
DTS 5.1 ch/DTS 96/24/DTS-ES Discrete/DTS-ES Matrix/DTS-HD High Resolution Audio/DTS-HD Master Audio/DTS:X
Linear PCM:
Linear PCM 2 ch 44.1 kHz/88.2 kHz/176.4 kHz/32 kHz/48 kHz/96 kHz/192 kHz/44.1 kHz/88.2 kHz
Linear PCM 5.1 ch 176.4 kHz/32 kHz/48 kHz/96 kHz/192 kHz
Linear PCM 6.1 ch 44.1 kHz/88.2 kHz/176.4 kHz/32 kHz/48 kHz/96 kHz/192 kHz
Linear PCM 7.1 ch 44.1 kHz/88.2 kHz/176.4 kHz/32 kHz/48 kHz/96 kHz/192 kHz
B. VIDEO FORMAT
* Supports only YUV420 input and output. The output will be downscaled to YUV420 if the image source is YUV422 inputted.
** 2160@60Hz is only supported at the input.
14. WEB MANAGEMENT
This extender provides a web-based interface that user can access and configure easily. Refer to the
PC connection dia-
gram
to connect a PC to the network before starting the web management.
15. IP DETECTION
To check the IP of transmitter or receiver, press the CONNECT button on the front panel of receiver to disconnect the
connection between transmitter and receiver, then the IP address will appear on the bottom-right corner of screen.
Resolution
Refresh rates (HZ)
640x480
50/59/60/72/75
720x480 (720P)
56/59/60/72/75
720x576 (576P)
50/60/70/72/75
800X600
56/60/70/72/75
1024X768
60/70/72/75
1152X864
50/69/60/75
1280x600
50/59/60
1280X720 (720P)
50/59/60/75
1280X768
50/59/60/75
1280X800
50/59/60/75
1280X960
50/59/60
1280X1024
50/59/60/75
1360x768
50/59/60/75
1366x768
50/59/60/75
Resolution
Refresh rates (HZ)
1440X1050
50/59/60
1440X900
50/59/60/70/75
1600x900
50/59/60
1600x1024
59/60
1600X1200
50/60
1680x1050
59/60
1920X1080i
25/29/30
1920X1080 (1080P)
50/59/60
1920X1200
50/60
2560x1080*
24/25/30/60
2560x1200*
30/60
2560x1600*
60
3840x2160*
24/25/30/60**
4096x2160 *
24/25/30/60**
FW:
Firmware version
Remote IP:
Receiver‘s IP address
Local IP:
Transmitter‘s IP address
ID:
Receiver‘s identification
FW: 16-Apr-11 b998
Local IP: 169.254.2.66
Remote IP: 169.254.2.156
ID: xxxxxxxxxx2c
FW: 16-Apr-11 b998
Local IP: 169.254.2.66
Press the link button to connect
Note:
The IP address will be changed when replugging the power adapter of the unit (transmitter/receiver). Once it happens,
please repeat the steps above to detect the IP again.
16. SYSTEM
Once you have connected to a PC and detected the IP address of target unit, open a browser and then enter the IP address
to access.
Click
Apply
once the settings have been changed.
Item
Option
Description
Version information
Display the information of unit.
Update Firmware
Update the firmware. Click Browse to select the firmware file and click Upload to upgrade.
The browser will be reloaded after updating. Please contact the technical support if you have
problem to upload.
Utilities
Factory Default
Restore to the factory default settings.
Reboot
Restart the system.
Reset EDID to Default Value
Reset EDID to factory default setting.
Console API Command
Refer to the manufacture FAE or technical support
If you don’t know what console command is.
Statistics
Display the information of network.