www.inline-info.com
2
3
CONTENT
1.
Introduction
2.
Features
3.
Specification
4.
Package contents
5.
Product overview
a.
Transmitter
b.
Receiver
6.
Application
7.
Requirement of Gigabit Ethernet Switch
................................................................................................
8.
Point-to-point
a.
Point-to-point connection diagram
...................................................................................................
b.
Operation
9.
Multiple connection
6-8
a.
Single TX to multiple RX connection
.............................................................................................
6-7
b.
Multiple TX to single RX connection
..............................................................................................
7-8
10.
Remote control
11.
RS232 connection
8-9
12.
PC connection diagram
13.
Supported format
10
a.
Audio format
10
b.
Video format
10
14.
Web management
10
15.
IP detection
10-11
16.
System
17.
Video wall basic setup
12
18.
Video wall advanced setup
13-14
19.
Network
15
20.
Function
16-19
21.
Disclaimer
1. INTRODUCTION
Thanks for purchasing 64601 4K over IP HDMI USB KVM Extender. The HDMI Extender comprises two distinct units, the
Transmitter and Receiver unit respectively. It’s a LAN based extender and working in pairs to extend your HDMI video
signal from local player to a remote display. To connect both units of transmitter and receiver, you can use either a direct
CATx cable connection or through a Gigabit Ethernet Switch in between. The signal can be delivered up to 100m, while still
keeping a satisfying image quality.
The supported resolution can be up to 2160p@30Hz with 7.1 audio channel. Applicable either over an exhibition room,
working floors, demo room, control center, or other mission-critical scenarios.
2. FEATURES
•
4K Over Gigabit Network with Ultra low 1 frame latency
•
Up to HDMI 2.0 2160p@60Hz 4:2:0 Video Input and
HDCP2.2 supported to 2160p@30Hz at the output
•
Audio supports LPCM and Dolby Digital /Dolby Digital
Plus/DTS/Dolby TruHD/DTS-HD bit stream
•
Each receiver can choose different video format (choo-
se input format or output)
•
Max. Bit Rate control (10 Mbps ~ 800 Mbps)
•
USB 2.0 pass-thru for IP KVM application
•
Webpage management
•
RS-232 Serial control command management
•
Https/Telnet command management
•
Automatic EDID configuration
•
Output video rotation
•
Output video partial enlargement and shift for videowall
and irregular video wall application
•
4-bit DIP switch for 16 stream channel selection
•
Small size / VESA mount
•
Rack-mount
3. SPECIFICATION
Component Type
Transmitter
Receiver
Dimension (L x W x H)
95 x 115 x 26 mm
115 x 115 x 26 mm
AV Interface
HDMI Female (In) x1
HDMI Female (Out, Loopback) x1
HDMI Female (Out) x1
USB Port
USB Type Mini-B Female x1
USB Type A Female x4
TX/RX Connection
RJ45 Female x1
Switch
4 Position Dip Switch x1
IR
3.5mm Jack Female x1
RS232
RJ12 Female x1
Power Adapter
DC 5V
Image Resolution
3840 x 2160 @30Hz
Operation Temperature
0 ~ 40°C
Storage Temperature
-20 ~ 60°C
Weight
310g
Humidity
0~90% RH, Non-condensing
Housing
Metal enclosure