INTORQ BFK458-06***25, Руководство по эксплуатации

Страница: 18 / 68

Technical specifications
INTORQ | BA 14.0168 | 09/2015 18
1)
The screw length depends on the material and the thickness of the customer's mounting place.
2)
The thread in the threading surface is offset by 30° in reference to the centre axle of the manual release
lever.
3)
Hex head screw according to DIN EN ISO 4017 - 8.8.
Size Pitch circle Screws
for the flange mount
DIN EN ISO 4762 (8.8)
Minimum depth
of the clearing holes
(in end shield)
Tightening torque
±5%

[mm]
1)
[mm]
Screws
[NM]
Complete lever
[NM]
06 72 3 x M4 0.5 3.0
2.8
08 90 3 x M5 1 5.9
10 112 3 x M6 2
10.1 4.8
12 132 3 x M6 3
14 145
3 x M8
1.5
24.6
12
16 170 0.5
18
196
4 x M8
2)
0.8
23
20 230
4 x M10
2)
2.1
48
25
278
6 x M10
3)
5
40
Tab. 4: Rated data for the screw set for flange mounting
Size
Pitch circle

[mm]
Screw set for
mounting to the
flange
Minimum depth
of the clearing
hole
[mm]
Screw set for
mounting onto the
motor/friction plate
Screw set for
flange with
through hole
06 72 3 x M4x35 0.5 3 x M4x40 3 x M4x45
08 90 3 x M4x40 1 3 x M5x45 3 x M5x50
10 112 3 x M6x50 2 3 x M6x55 3 x M6x65
12 132 3 x M6x55 3 3 x M6x60 3 x M6x70
14 145 3 x M6x60 1.5 3 x M8x70 3 x M8x80
16 170 3 x M8x70 0.5 3 x M8x80 3 x M8x90
18 196 6 x M8x80 0.8 6 x M8x90 -
20 230 6 x M10x90 2.1 6 x M10x100 -
25 278 6 x M10x100 5 6 x M10x110 -
Tab. 5: Rated data for the screw set for brake mounting