Mechanical installation
INTORQ | BA 14.0215 | 07/2019
25
Fig. 8:
Installing the hub onto the shaft
A
Circlip
B
Hub (optional)
C
Key shape B (angular version)
D
End shield
E
Toothed shaft (optional)
1. Insert the key into the shaft.
2. Press the hub with a moderate amount of force to the shaft.
3. Secure the hub against axial displacement (for example, by using a circlip).
5.5
Brake mounting
Notice
Here, the mounting of the brake is shown in the version with the optional flange and toothed
shaft
NOTICE
Only in the case of rotors with mounting paste on their gear teeth:
¾
Remove cover films from both front ends of the rotor.
¾
Protect friction surfaces against contact with mounting paste!
¾
After the mounting, excessive mounting paste must be removed properly!
