Intex ECO15220 Скачать руководство пользователя

Страница: 3 / 34

261A

SAVE THESE INSTRUCTIONS

(261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014

English

Page 3

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

• To reduce the risk of injury, do not permit children to use this product. Always supervise children and those

with disabilities.

• Children must stay away from this product and electrical cord(s).

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children

without supervision.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Assembly and disassembly by adults only.

• The pump must be supplied through a residual current device(RCD) having a rated residual operating current

not exceeding 30mA.

• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any

adjustment to the product.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge

trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to

connect unit to electric supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Keep this product more than 2m away from the pool.

• Keep this product more than 3.5m away from the pool (for France only).

• Keep the plug of this product more than 3.5m away from the pool.

• Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool.

•

The pump must not be used when people are in the water.

• This product is for use with storable pools only. Do not use

with permanently installed pools. A storable pool

is constructed so that it may be readily disassembled for storage and reassembled to its original configuration.

• To reduce the risk of entrapment hazard, never enter the pool if suction strainer component is loose, broken,

cracked, damaged or missing. Replace loose, broken, damaged, cracked or missing suction strainer

components immediately.

• Never play or swim near suction fittings. Your body or hair may be trapped causing permanent injury or

drowning.

• To prevent equipment damage and risk of injury, always turn pump off before changing the filter control valve

position.

• Never operate this product above the maximum working pressure stated on the filter tank.

• Hazardous Pressure. Improper tank valve cover assembly could cause the valve cover to blow off and cause

serious injury, property damage or death.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC SHOCK,

ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

These product warnings, instructions and safety rules provided with the product represent some common risks

of water recreation devices and do not cover all instances of risk and danger. Please use common sense and

good judgement when enjoying any water activity.

Содержание ECO15220



































Результаты поиска

Содержание ECO15220

Отзывы:

Похожие инструкции для ECO15220

Бренды по названию

Популярные бренды

Intex ECO15220, Руководство пользователя

Результаты поиска

Содержание ECO15220

Отзывы:

Похожие инструкции для ECO15220

Бренды по названию

Популярные бренды