Intex ECO15220 страница 12 Скачать руководство пользователя

Страница: 12 / 34

261A

SAVE THESE INSTRUCTIONS

(261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 08/04/2014

English

Page 12

SAND FILTER PUMP HOSE CONNECTION SETUP

The 6-way valve has three hose connection ports.

Connect one hose

(12)

end to the pre-filter inlet and the other end of the hose to the lower

plunger valve with the strainer. Ensure the hose nuts are securely tightened.

Connect the second hose

(12)

between the electrolytic cell outlet and the upper plunger valve

with the inlet-nozzle. Ensure the hose nuts are securely tighten.

The third hose connection port (drain/waste outlet) on the 6-way valve shall be directed to

a proper draining receptacle using a hose or pipe (not provided). Remove the drain cap before

attaching the drain/waste hose or pipe.

The sand filter pump is now ready to filter the pool.

WARNING

• Keep this product more than 2m away from the pool.

• Keep this product more than 3.5m away from the pool (for France only).

• Keep the plug of this product more than 3.5m away from the pool.

• Position this product away from the pool, so as to prevent children

from climbing on it and accessing the pool.

(ILLUSTRATION NOT TO SCALE)

WATER LEVEL

>3.5M

>2M

6-WAY VALVE

ADJUSTABLE

POOL INLET

NOZZLE

THREADED

STRAINER

CONNECTOR

OUTSIDE

LINER WALL

PLUNGER

VALVE

DRAIN

According to the International Standard, IEC 60364-7-702, on electrical installation of swimming

pools and other basins equipments, the following installation distances must be respected:

• The filter pump must be position more than 2m away from the pool walls.

• The power cord plug to the 220-240 volt electrical power source of the filter pump must be

position more than 3.5 m away from the pool walls.

Check your local authorities to determine the appropriate standard and requirements for “electrical

installation of swimming pools and basins equipments”. The following table is for reference only:

International

France

Germany

The Netherlands

Country/Region

Standard Number

IEC 60364-7-702

NF C 15-100-7-702
DIN VDE 0100-702

NEN 1010-702

Содержание ECO15220



































Результаты поиска

Содержание ECO15220

Отзывы:

Похожие инструкции для ECO15220

Бренды по названию

Популярные бренды

Intex ECO15220, Руководство пользователя

Результаты поиска

Содержание ECO15220

Отзывы:

Похожие инструкции для ECO15220

Бренды по названию

Популярные бренды