IntesisBox
®
BACnet/IP Server - Modbus RTU Master
User’s Manual r14 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
11 / 27
4. Connection
The device uses a standard enclosure allowing DIN EN60715 TH35 rail mounting. Its plastic
meets standard PC UL 94 V0.
Figure 4.1
Device connection diagram
Ensure proper space for all connectors when mounted.
The items supplied by Intesis Software for this integration are:
IntesisBox BACnet/IP Server - Modbus RTU Master hardware
Console cable. Standard DB9F-DB9M cable 1.8 meter long.
Installation sheet, containing a link to the LinkBoxBacnet
software and this
manual.
4.1 Power device
The first step to perform is to power up the device. To do so a power supply working with
any of the voltage range allowed is needed (check section 6). Once connected the ON led
(Figure 4.1) will turn on.
WARNING!
In order to avoid earth loops that can damage the gateway and/or any other
equipment connected to it, we strongly recommend:
ON
Power
9
– 30 Vdc
Max. 125mA
24 Vac
Max. 127mA
50-60Hz
- +
CMN 24Vac
PC
Console
Area
.
Line
.
Com
.
.
IntesisBox
®
www.intesis.com
Serial Port
(Not used)
IBOX-BAC-MBRTU
BACnet/IP
ETH
10 Base-T
ACT
LNK
Power
PC (LinkBoxBacnet)
BACnet/IP
(Ethernet)
PC
Console
Tx
Rx
MODBUS RTU
EIA458
- + EIA232
