IntesisBox IBKNXHIS016O000, Руководство пользователя, Страница: 16 / 30

Intesis Box
®
KNX
– HITACHI VRF
User Manual r1.1 EN
16/30
This information is subject to change without prior notice
IntesisBox is a registered trademark of Intesis Software S.L.U.
email: info@intesisbox.com
web: www.intesisbox.com
phone: +34 938047134
Figure 4.5 IntesisBox MAPS Scan Hitachi Units window
By pressing Scan button, connected Hitachi H-Link bus will be scanned for available units. Error window will appear if
there is a problem in the connection with H-
Link bus (units not powered, bus not connected, …).
A progress bar will appear during the scan, which will take up to a few minutes. After scan is completed, detected units
will be shown in available units as follows:
Figure 4.6 IntesisBox MAPS Scan Hitachi Units window with scan results
Select with its checkbox units to add (or replace) in installation, according to selection Replace Units / Add Units .
After units to be integrated are selected, click button Apply , and changes will appear in previous Units Configuration
window.