Intesis
Box
®
KNX
– HITACHI VRF
User Manual r1.1 EN
15/30
This information is subject to change without prior notice
IntesisBox
is a registered trademark of Intesis Software S.L.U.
email:
web:
www.intesisbox.com
phone: +34 938047134
4.2.5 Hitachi configuration
Set parameters for connection with Hitachi
’s installation.
Figure 4.4
IntesisBox MAPS Hitachi configuration tab
In Units Configuration section you need to enter, for each unit:
•
Active
. If it’s active (checkbox at Unit xx), ranging from 1 to 64 indoor units that will be integrated (maximum
number of units will depend on IntesisBox model)
•
IU address
. Address 1..64 of Unit in Hitachi H-Link bus.
•
OU address
. Address 1..64 of Outdoor Unit in Hitachi H-Link bus.
•
Description
. Descriptive name to easy identification of the unit (for example, ‘living room floor 1 unit’, etc).
Additional to manual entry of each unit, autodiscover of present units in an H-Link installation is possible. To do so, click
button
Scan
. Following window will appear:
