IntesisBox DK-AC-MBS-1, Руководство пользователя

Страница: 20 / 23

DK-RC-MBS-1
User’s Manual r3.3 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
URL
Email
Phone http://www.intesisbox.com
info@intesisbox.com
+34 938047134
20/23
71 H6 Compressor motor over current sensor is abnormal
72 H7
Overload or over current sensor of fan motor is
abnormal
73 H8 Sensor system of over-current of AC input
74 H9 Outdoor air thermistor system error
75 HA Discharge air thermistor system error
76 HH Pump motor sensor system of over current is abnormal
77 HC Water temperature sensor system error
79 HE Sensor system of drain water is abnormal
80 HF Ice thermal storage unit error (alarm)
81 F0 No.1 and No.2 common protection device operates.
82 F1 No.1 protection device operates.
83 F2 No.2 protection device operates
84 F3 Discharge pipe temperature is abnormal
87 F6 Temperature of heat exchanger(1) abnormal
91 FA Discharge pressure abnormal
92 FH Oil temperature is abnormally high
93 FC Suction pressure abnormal
95 FE Oil pressure abnormal
96 FF Oil level abnormal
97 J0 Sensor system error of refrigerant temperature
98 J1 Pressure sensor error
99 J2 Current sensor error
100 J3 Discharge pipe thermistor system error
101 J4
Low pressure equivalent saturated temperature sensor
system error
102 J5 Outdoor Suction pipe thermistor system error
103 J6 Unit Heat exchanger(1) thermistor system error
104 J7 Heat exchanger(2) thermistor system error
105 J8 Oil equalizer pipe or liquid pipe thermistor system error
106 J9
Double tube heat exchanger outlet or gas pipe
thermistor system error
107 JA Discharge pipe pressure sensor error
108 JH Oil temperature sensor error
109 JC Suction pipe pressure sensor error
111 JE Oil pressure sensor error
112 JF Oil level sensor error
113 L0 Inverter system error
116 L3 Temperature rise in a switch box
117 L4 Radiation fin (power transistor) temperature is too high
118 L5
Compressor motor grounded or short circuit, inverter
PCB fault
119 L6 Compressor motor grounded or short circuit
120 L7 Over current of all inputs
121 L8 Compressor over current, compressor motor wire cut
122 L9
Stall prevention error (start-up error) Compressor
locked, etc.
123 LA Power transistor error
125 LC
Communication error between inverter and outdoor
control unit
129 P0 Shortage of refrigerant (thermal storage unit)
130 P1 Power voltage imbalance, open phase
132 P3 Sensor error of temperature rise in a switch box
133 P4 Radiation fin temperature sensor error
134 P5 DC current sensor system error
135 P6 AC or DC output current sensor system error
136 P7 Total input current sensor error