InterVac IVD660-F, Инструкция по установке и эксплуатации

Страница: 10 / 13

10
Replacement Set, 3-Pack:
Dust Bag # Y-20 Motor Filter # Y-25 Exhaust Filter # Y-50
Part #
Y20-3
, includes 3 dust bags, 1 motor filter and 3 exhaust filters
Pic. 5 Pic. 6 Pic. 7 Pic. 8
D: To change motor filter when dirty, replacement Part # Y25
1. Remove door and dust bag.
2. Reach into the bottom of the vacuum chamber and pull the
motor filter out.
Please, notice there is a ½” radius cut out on the back side
of the filter towards the right.
The new filter must be inserted with the ½” cut out into the same area, see
to it that the filter is all the way pushed under the vertical ribs!
E: Closing the Door
1. Take the door and open the utility valve cover.
2. Lift the door parallel with the front of the vacuum. Align the hole in the door with
the hole in the bag collar behind, then push door with both hands in place.
3. Before closing door, tuck in the sides of the bag, and watch that the motor filter
lays flat under the dust bag so the door can properly seal.
CAUTION: DO NOT PICK UP LIQUIDS, LIT CIGARETTES, HOT ASHES,
RAZOR BLADES, NEEDLES, PINS OR OTHER SHARP OBJECTS!
Y-20 dust bag
Y-25 motor filter
Y-50 exhaust filter