30
31
Placement of AutoPhone magnets
Place AutoPhone magnet on your telephone receiver to allow operation of the
AutoPhone function. In order to place AutoPhone magnet properly:
1. Clean the telephone receiver thoroughly.
2. Hold the telephone vertically, in a position similar to when making a telephone
call.
3. Place the magnets just below the telephone receiver. Make sure not to
cover the microphone openings. If necessary, move the magnet to another position to improve ease of
use and comfort while speaking.
4. If you are not satisfied with the strength of AutoPhone, you can reposition the AutoPhone magnet or
add additional AutoPhone magnets.
i
Only use a recommended cleaning agent to clean the telephone prior to placing the magnet on the
phone.
AutoPhone usage
Telephones can be used in a normal manner. A short melody will indicate that the AutoPhone feature has
automatically switched the hearing instrument to your telephone programme. Initially, you may need to
move the telephone receiver slightly to find the best position for reliable AutoPhone activation and good
hearing on the telephone. When you remove the telephone receiver AutoPhone will stay activated for a
few seconds to avoid accidental switching off. After that hearing instrument will switch to previously used
environmental programme.
