InterTest EM13686, Руководство пользователя и по обслуживанию

Страница: 8 / 44

InterTest, Inc. • 908-496-8008
MZ-
5™ HD-UV Inspection System
EM14809 Rev B Page 8
Version 2.0 • Sept 27 2019
outlet. Under no circumstances should the user attempt to defeat the purpose of the
grounding-type plug.
Never attempt to modify the power cord. Do not insert or unplug the power plug with wet
hands. This could result in an electrical shock. When unplugging the power plug, always
grasp its plug portion. Never pull on the power cord directly. Pulling on the power cord
may expose or snap the internal wires, which would weaken or damage the power cord
and result in an electrical shock.
Do not place anything on top of the power cord. Never locate the equipment where people
will walk on the power cord or where heavy items may move over it. Never stretch or
excessively bend the power cord.
Always insert the power cord’s plug completely into the
socket. Failure to do so could result in a fire or an electrical shock.
Never use power cords other than the power cords that were provided. Using improper
power cords could result in a fire or an electrical shock.
For safety reasons, the use of an extension cord is not recommended. If an extension cord
must be used with the equipment, ensure that the total amperage rating of the extension
cord is equal to or greater than 15 amperes. If an extension cord must be used, never allow
other devices to share the extension cord.
IMPORTANT: Never use the equipment in a wet or overly damp location. Exposing the
equipment to water or other liquids could result in a fire or an electrical shock.
IMPORTANT: The MZ-
5™ HD-UV Inspection System is to be used for inspecting gun tubes,
Tank gun tube, mortar tube, ship gun tube, turbine rotor bores, generator rotor bores,
shaft and pipe inspections ONLY. Improper use of this product for objects for which it is
not intended or for environments for which it is not intended will void the warranty.
Warranty information can be found starting on Page
15 .
CAUTION: The UVA output is an eye and skin hazard. Do not allow close or prolonged
exposure to the UVA output of the MZ-
5™ HD-UV Inspection System. UV Eye protection is
required for close or prolonged exposure.