InterTest EM13686, Руководство пользователя и по обслуживанию

Страница: 16 / 44

InterTest, Inc. • 908-496-8008
MZ-
5™ HD-UV Inspection System
EM14809 Rev B Page 16
Version 2.0 • Sept 27 2019
To assemble the system, perform the following steps:
(1) Refer to Figure 3 : Take
6’ insertion pole with the section that starts at 3 feet mark and slide over
and up the 25 Meter Power & Fiber Cable off the back of the Camera Head. Once the pole meets
the base of the Camera Head, snap together. Repeat steps for other 7 poles so the
measurement markings are in ascending, numerical order. The measurement markings on the
poles should line up if snapped together correctly.
Note : Pole sections are designed to be assembled in a specific order
Figure 3-Camera Head & Pole Sections
(2) Refer to Figure 4. Make sure the Rack Mount Control Unit is powered down. The ON/OFF
Switch for the system can be found on the front of the UPS. The display will not be lit if the unit is
“
OFF
”
Figure 4 System ON/OFF