8 / 18
1) Turn on the unit.
A. Plug in and all indicators will light up on control panel and reminding music will be on, display window will show
ambient temperature ranging from 10- 35
℃
,
will in red color, unit is standby for operation.
B. Press the
button, the unit is on with reminding music sounded,
will in green color, and operate in
Cool Mode automatically, temperature set 24
℃
,fan runs at high speed, and
in green color.
2) Select operating mode
Press the
button to select a desired mode shown below, and its corresponding indicator will light up.
COOL DEHUMIDIFY FAN
Under cooling mode, press
“
Timer
”
+
“
”
buttons together, the unit auto enter into
“
Sleep
”
Mode.
3) Adjust temperature
The temperature can be set within a range of 17-30
℃
under cooling mode.
Press
or
buttons to increase or decrease the temperature 1
℃
by pressing once.
Press
and
buttons together to convert Celsius degrees and Fahrenheit degrees and corresponding indicator
will light up.
4) Adjust fan speed
Press the
button to select a desired fan speed shown below
5) Stand-by
Press the
button again, the unit will stop working with reminding music sounded,
will be in red color.
Notice: Working principle for each mode and function
1. Cool mode:
z
When room temperature is 1
℃
higher than setting temperature, the compressor and fan will start working.
z
When room temperature is 1
℃
lower than setting temperature, the compressor will stop working and fan keep
working at original speed.
z
Room temperature can be set within a range of 17-30
℃
and fan speed can be adjusted to high or low level.
z
On/Off time can be set.
z
E1, E2 & E4 protection (see Troubleshooting).
z
Water-full warning protection.
2. Fan mode:
z
Fan runs at set speed, and compressor will not work.
z
Fan speed can be adjusted to high or low level.
z
Room temperature will automatically show on LED display with range 10-35
℃
.
z
Room temperature can’t be adjusted.
z
On/Off time can be set.
