12 / 18
Handling Position
Air outlet
z
Drain the water in the unit completely to prevent water leakage and wet the floor or carpet before handling or moving
the unit.
z
Take away the remote control before handling or moving the unit
Installation & Adjustment
1. Installation
Warning:
z
Keep this mobile air-conditioner in upright position at least 2 hours before first installation.
z
This air-conditioner may be moved indoors conveniently; keep the unit in upright position while moving it. The
air-conditioner shall be placed on flat surface.
z
Do not install or operate this air-conditioner in bathroom or other wet environments.
1.1 Installation of exhaust hose assembly and its adapter
1) Take out the exhaust hose assembly and its adapter from plastic bag.
2) Extend the exhaust hose at one end, screw the round end of adapter into exhaust hose at anticlockwise direction
(as Photo)).
Note: Screw adapter into right position, at least 3 laps, to keep good connection of exhaust hose assembly and its
adapter (as Photo).
1.2 Installation of the exhaust hose assembly into unit
1) Determine window seal-plate position, vertical or horizontal direction.
2) If window seal-plate will be in horizontal position, the slant panel A of adapter should be upwards.
3) If window seal-plate will be in vertical position, and will be at left side of window, the slant panel A of adapter
should be at right direction.
4) If window seal-plate will be in vertical position, and will be at right side of window, the slant panel A of adapter
should be at left direction.
