background image

www.intertec.info

Operating Instructions CP VARITHERM DPA HI

HOM161029899Ien-6

Page 3 / 8

INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany · 

 +49 9445 9532-0 ·   [email protected]

1

General

These  operating  instructions  describe  the  safe  and
proper  way  to  work  with  the  device.  The  safety
information  and  instructions  given  as  well  as  the  local
accident  prevention  regulations  and  general  safety
regulations  valid  in  the  area  of  application  must  be
complied  with.  These  instructions  are  a  constituent  part
of  the  instrument  and  need  to  be  kept  in  the  immediate
vicinity of the device accessible to personnel at all times.

Before  starting  any  work,  the  operating  instructions
should be read in full.

2

Use

The CP..THERM heaters are manufactured according to
Directive 2014/34/EU and are licensed for direct heating
through  flange-mounting  (conduction)  or  for  room
heating  (convection)  in  Ex-zone  1  and  Zone  2  for
instrument categories G/ D in temperature classes T3 to
T6. You will find the temperature class for your device on
the label. See 

Technical Data [

}

Page 4]

 section.

The areas of application are:

• Frost protection

• Condensation protection

• Maintaining temperature

The  SMART  HEATER  HI  SYSTEM  is  used  for
demanding  heating  tasks  in  explosive  areas  to  maintain
high  temperatures  in  analytical  instruments.  The
temperature  controller  TC  connected  to  the  electrical
heater  has  a  temperature  sensor  in  the  heating  coil
serving as a temperature limiter.

EC  type  examination  certificates  PTB  02  ATEX  1041  X
with  appendices  and  supplements  in  German  and
English,  as  well  as  IEC  Scheme  Certificate  IECEx  PTB
07.0052X.

See 

http://www.intertec.info

3

Explanation of symbols for warnings
and signal words

The  safety  information  warns  the  user  about  risks  and
provide information on how risks can be avoided.

Safety  information  can  be  found  at  the  start  of  the
chapter  before  the  instructions  which  may  lead  to  a
hazardous situation. Additional safety information can be
found at the beginning of this manual.

Safety  instructions  which  must  be  adhered  to  are
highlighted as follows:

 DANGER

DANGER

This sign is warning about an extremely hazardous
situation which, if not heeded, will lead to death or
serious irreversible injury.

 WARNING

WARNING

This sign is warning about a hazardous situation which,
if not heeded, may lead to death or serious irreversible
injury.

 CAUTION

NOTICE

This sign is warning about a hazardous situation which,
if not heeded, may lead to slight, reversible injury.

NOTICE

NOTE

It is essential to pay attention to this safety advice as you
may otherwise incur material damage.

 INFO

Important notes and useful additional information.

4

Safety information

 CAUTION

Risk of injury at the rib ends

The sharp edges on the heating ribs may cause injury if
handled incorrectly.

Содержание CP VARITHERM DPA HI









Отзывы: