INTERSPORT ENERGETICS PR 8.9, Руководство пользователя

Страница: 5 / 116

5
1. Please note that this treadmill need at least 2 people
to finish assembly.
2. Open the carton box, and take out all the protection
foam and assembly parts.
3. As the photo shows, take out the running deck from
the box, lay it on the flat floor, and then cut the belt.
Tips: The console plastic housing is packed in a box,
which put under the running deck. Please take care of it
when taking out the running deck.
STEP 1
STEP 2
1. As the photo shows, get the lower part of
upright close to the base of treadmill, and
then connect the cable as the photo shows,
pay attention to the connection of the cable,
a wrong connection would caused damage of
the connector.
2. As the photo shows, use the wrench 6# to
install the upright onto the base of treadmill
with 3 M10x50 bolts and 3 M10 washers. Be
well noted that before fully assembly the
treadmill, do not fasten all the bolts. Do the
same assembly for both uprights, and be noted
that only right upright have cable connection.