![INTERSPORT ENERGETICS POWER RUN 20.1 Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/intersport/energetics-power-run-20-1/energetics-power-run-20-1_manual_2080612031.webp)
31
WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector.
CLEANING:
Routine cleaning of your TREADMILL will extend the life of your treadmill.
WARNING!
To prevent electrical shock, be sure the power to the treadmill is OFF and the unit is unplugged from the wall electrical outlet
before attempting any cleaning or maintenance.
AFTER EACH WORKOUT
: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to remove excess
perspiration. USE NO CHEMICALS.
WEEKLY:
Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and eventually ends up
underneath the treadmill. Vacuum underneath the treadmill once a week.
DECK LUBRICATION:
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be
checked periodically for lubrication to ensure optimal treadmill performance.
Every 12 hours of operation, lift the sides of the walking belt and feel the top surface of the walking board as far under as you can reach. If
you feel signs of silicone, no further lubrication is required.
If it feels dry to the touch, lubrication is needed. Ask your retailer or call Service line for the type of silicone.
TO APPLY LUBRICANT TO THE WALKING BOARD
1)
Position the walking belt so that the seam is located on top and in the center of the center of the walking board.
2)
Insert the spray nozzle into the spray head of the lubricant can.
3)
While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board approximately 10cm from the
front of the treadmill. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other
side of the belt.
Spray approximately 4 seconds on each side.
4)
Allow the silicone to 'set' for one minute before using the treadmill
WARNING
: Do not over-lubricate the walking board. Excess lubricant should be wiped off with a clean towel.
Содержание ENERGETICS POWER RUN 20.1
