Interroll Roller curve SH 1210
Installation
Version 1.0 (06/2022) en
Translation of original operating instructions
31
Straight roller conveyor -
roller curve
The modules can be connected with each other in different ways:
• Horizontal
• Up to max. 4° ascending
• Up to max. 4° descending
4
6
5
3
2
3
2
1
3
5
1
Roller conveyor
4
Roller curve
2
Torx screw
5
Nut
3
Washer
6
Module connector RC
4
If present, disassemble end plate at roller conveyor (1).
4
Position the modules to be connected (1, 4) in such a way that the side profiles are aligned.
4
Align the top edges of the module by using the height-adjustable feet of the supports.
4
Secure the adjusted height.
4
Check alignment with a spirit level or rotation laser.
4
Connect the side profiles of the modules (1, 4) each with one module connector (6) form-fit
with each other on the right and left and fasten them with screws (2), nuts (5) and two
washers (3) each in the hole pattern of the side profiles.
4
Fasten the module torsion-free, e.g., by anchoring it to the floor or to adjacent components.
