Interroll DP 0080, Руководство пользователя

Страница: 25 / 40

Version 1.2 (08/2022) en
Translation of original operating instructions 25 of 40
Initial startup and operation
7 Initial startup and operation
7.1 Initial startup
The Pallet Drive may be put into operation only if it is correctly installed and connected to the power supply and all
rotating parts have been fitted with the corresponding protective devices and guards.
7.1.1 Checks before the initial startup
The Pallet Drive is filled with the correct oil quantity at the factory and ready for installation. Prior to the initial startup
of the motor, the following steps have to be performed:
1. Ensure that the motor type plate matches the version ordered.
2. Ensure that no contact points exist between objects, conveyor belts and rotating or moving parts.
3. Ensure that the Pallet Drive and the conveyor belt can move freely.
4. Ensure that the belt features the correct tension according to the recommendations from Interroll.
5. Ensure that all bolts are tightened according to the specifications.
6. Ensure that no additional dangerous areas arise due to interfaces to other components.
7. Ensure that the Pallet Drive is correctly wired and connected to the voltage supply with the correct voltage.
8. Check all safety devices.
9. Ensure that no bystanders are in dangerous areas around the conveyor.
10. Ensure that the external motor protection is correctly adjusted to the rated motor current and a corresponding
switching device can switch off the motor voltage at all poles if the integrated thermal circuit breaker trips.
7.2 Operation
CAUTION
Rotating parts and accidental starting!
Risk of crushing for fingers.
¾
Do not reach between Pallet Drive and belt.
¾
Do not remove the protection device.
¾
Keep fingers, hair and loose-fitting clothes away from Pallet Drive and chains/toothed belts.
¾
Keep watches, rings, chains, piercings and comparable jewelry away from the Pallet Drive and chains/
toothed belts.