Interphone PASSENGER F3, Инструкция по эксплуатации

Страница: 25 / 112

IT
EN
FR
ES
DE
PT
NL
RU
PL
SV
FI
JP
the
INTERPHONE F3
LED will remain fixed blue, whilst that
of INTERPHONE will flash blue quickly.
2.4 audio GPS
Pairing
GPS NAVIGATORS use the TELEPHONE (headset) profile for
audio connection: to use a telephone whilst using a navi-
gator, you will need to use the specific function of the GPS
device. For further information and settings, please consult
the navigator manual.
3 USE
3.1 Telephone function
To answer a call:
as a call comes in, the speaker
produces a warning sound or the telephone’s
ring: to answer, simply press and release the MFB
button.
To end a call:
to end a call, simply press and release the MFB
button.
vocal call:
some telephones allow you to make a vocal call
simply by pressing and releasing the MFB button.
To refuse a call:
to refuse the call, press and hold the MFB
button for approximately 4 seconds.
To refuse a call in
vOX mode, follow the instructions given in
the vOX FUNCTION section.
volume adjustment: to adjust the volume, press the but-
tons or volume - , depending on the desired vo-
lume level.
3.2 Intercom function
To enable intercom function: to enable the
conversation in an intercom profile, press the
MFB button on one of the two
INTERPHONE
F3 s, and hold for about 3 seconds. An audible
warning will advise you when connection has occurred.
Conversation in intercom mode is full-duplex.
To disable intercom function: to disable intercom function,
simply press and release the MFB button.
volume adjustment: to adjust the volume, press the but-
tons or volume - , depending on the desired vo-
lume level.
3.3 Tel Intercom function
With this combination, the connec-
tion to the telephone function takes
priority.
• During a telephone conversation,
interphone communication is not permitted.
• To enable the intercom function, there cannot be a telepho-
ne call underway: press and hold the MFB button for around
3 seconds. An acoustic sound will advise you of connection.
Conversation in intercom mode is full-duplex.
• To end a conversation in intercom mode, simply press and
release the MFB button.
• During an interphone conversation, you can answer or refuse
a telephone call received. Intercom communication will be in-
terrupted and re-activated automatically at the end of the call.
• To answer a telephone call, press and release the MFB button.
• To end a telephone call, press and release the MFB button.
• To refuse the call, press and hold the MFB button for appro-
ximately 4 seconds.
• To adjust the volume, press the buttons
or volu-
me - , depending on the desired volume level.
3.4 voice response (vOX )
The voice response function allows you to an-
swer a call without having to press any buttons.
Enabling voice response: Press and hold the
button for approximately 5 seconds.
An acoustic sound will advise you that this has been done.
disabling voice response: Press and hold the volume -
button for approximately 5 seconds. An acoustic sound will
advise you that this has been done.
To answer a call: When receiving a call, simply say a word
(e.g. ‘HELLO’) within ten seconds, to enable the line.
To refuse a call: When receiving a call, simply allow ten se-
conds to pass and it will be refused.
3.5 voice call
The voice call function allows you to make a call
without using the telephone keys.
INTERPHONE
F3 is compatible with the voice call function of
various different mobile Bluetooth® telephones:
intercom
intercom
telecom
telecom
telecom
telecom