background image

UDM108-01 

   4 

   RSA2024-TB/2” 

Service Instructions 

E

QUIPMENT WARRANTY AND LIMITED REMEDY

:  The following warranty is made in lieu of all other 

warranties, express or implied, including, but not limited to, the implied warranty of merchantability, the 
implied warranty of fitness for a particular purpose, and any implied warranty arising out of a course of 
dealing, a custom or usage of trade: 
 
Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties: 

1.

 

The HSD

 2000 Tape Heads' knife blades, springs and wipe down rollers will be free from all 

defects for a period of ninety (90) days. 

2.

 

All other HSD

 2000 Tape Head parts will be free from all defects for one (1) year after delivery. 

3.

 

Water Activated Tapers’ blades and brushes will be free from defects for ninety (90) days after 
delivery 

4.

 

Drive Belts will be free from defects for ninety (90) days after delivery 

5.

 

The Gear Motors will be free from defects for one (1) year after delivery. 

6.

 

All other components for Case Tapers and Case Erectors will be free from defects for one (1) 
year after delivery.  

 
If any part is proven defective within its warranty period, then the exclusive remedy and Intertape's and 
the seller's sole obligation shall be, at Intertype’s option, to repair or replace the part, provided the 
defective part is returned immediately to Intertape's factory or an authorized service station designated by 
Intertape. 
 
A part will be presumed to have become defective after its warranty period unless the part is received or 
Intertape is notified of the problem no later than five (5) calendar days after the warranty period. 
 
If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its option, 
will replace the equipment or refund the purchase price.  Intertape shall have no obligation to install the 
repaired or replacement part. 
 
Intertape shall have no obligation to provide or pay for the labor required to install the repaired or 
replacement part.  Intertape shall have no obligation to repair or replace (1) those parts failing due to: 
operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts 
 

1.  Failure or damage is due to misapplication, lack of proper maintenance, abuse, improper 

installation or abnormal conditions such as temperature, moisture, dirt or corrosive 
matter, etc. 

2.  Failure due to inadequate cleaning, improper operating environment, improper utilities 

or operator error. 

3.  Failure due to operations above the rated capacities, or in any other improper manner, 

either intentional or otherwise. 

4.  Failure is due to equipment, which has been altered by anyone other than an authorized 

representative of Intertape Polymer Group. 

5.  Failure is due to an attempt by the purchaser to correct alleged defective equipment.  In 

this event the purchaser is responsible for all expenses incurred. 

 

L

IMITTION OF LIABILITY

:  Intertape and seller shall not be liable for direct, indirect, special, incidental 

or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or 
any other legal theory. 
 
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed 
only by written agreement signed by authorized officers of Intertape and seller. 

Содержание ipg RSA 2024-TB/2"




































































Отзывы: