Interpack ipg RSA 2024-TB/2", Руководство по эксплуатации и список запасных частей, Страница: 14 / 67

UDM108-01 14 RSA2024-TB/2”
Set-Up Procedure
Table Level
The Carton Sealer must be installed on a near level ground.
Ensure that the machine is level and firmly on the ground (no rocking). Adjust the roller height
with the four (4) telescopic adjustment legs to accommodate conveyor heights from 24 to 30
inches.
To adjust the Carton Sealer height,
jack up the machine to give ample
room to extend the legs. Using a
3/4" (19 mm) box end wrench, loosen
the eight (8) M10 hex head bolts.
Adjust the legs to the desired
conveyor height and tighten the
bolts. Etched lines on the legs ease
leveling.
Customer supplied infeed and exit conveyors (or rollers) must be level with the machine,
otherwise, the performance of the machine may be affected. The customer-supplied infeed
conveyor (if used) should provide straight and level entry. The customer-supplied exit conveyor
(if used) should be straight and declined no more than 1/4 inch per foot away from the machine.
Stop/Start Box
The Stop/Start Box contains :
the red "E-STOP" mushroom push button,
the green "ON" push button,
and the “BLOCKED” button.
The E-Stop is a detented type, when it is pushed
down, it will stay in the down position. In order to
re-start the machine, the operator has to pull up the
E-Stop button and press on the green "on" push
button.
1
2
3
3
1
2
Figure 8
Figure 9