Interpack ipg RSA 2024-TB/2", Руководство по эксплуатации и список запасных частей

Страница: 13 / 67

UDM108-01 13 RSA2024-TB/2”
Set-Up Procedure
Receiving and Handling
After unpacking the machine, look for any damage that may have occurred during shipping.
Should the machine be damaged, file a claim with the transport company and notify your
representative as soon as possible.
The following instructions are presented in
the order recommended for setting up and installing
the RSA 2024-TB Carton Sealing machine as well as for learning the operating functions and
adjustments . Following them step by step will result in your thorough understanding of the
machine and an installation in your production line that best utilizes the many features built into
the carton sealer.
1.
Lift off cover and sleeve after removing the strapping and staples at bottom.
2.
Remove mounting bolts and nuts, which secure the RSA 2024-TB to the shipping pallet
4.
Lift machine off pallet and install on your packaging line.
5.
Ensure that the machine is level and firmly on the ground (no rocking). Note that the
machines’ roller height can be adjusted with the four (4) adjustment legs to accommodate
conveyor heights from 23 ½" to 29 ½". To adjust the carton sealer, block the machine to
allow adequate leg adjustment. Using a 9/16" box end wrench, loosen and remove the
eight (8) 3/8 hex head bolts, adjust the legs to the desired conveyor height and reinstall
the bolts.
6.
Customer supplied infeed and exit conveyors (or rollers) must be level with the machine,
otherwise, the performance of the machine may be affected.
Note : The exit conveyor either gravity fed or driven should be installed with
no more than 1/4" per foot decline.