Page 5
INSTALLATION INSTRUCTIONS
Remove
packaging materials
Remove and dispose of/recycle packaging
materials. Remove tape and glue residue
from surfaces before turning on the air
conditioner. Rub a small amount of liquid
dish soap over the adhesive with your
fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing
alcohol, flammable fluids, or abrasive
cleaners to remove tape or glue. These
products can damage the surface of your air
conditioner.
Handle air conditioner gently.
Remove
Chassis
1. Pull down the front panel and remove the filter
2. Lift the front panel upwards to remove and
place to the side.
3. Locate the four faceplate screws and remove.
These screws will need to be re-installed prior to
mounting the air conditioner
4. After removing the screws, gently pull away
the faceplate from the air conditioner cabinet
FIG.1
FIG.2
FIG.4
FIG.3
