Page 11
REMOTE CONTROL
Handling and location of the remote controller
Use the remote control at a distance of 16 ft., or less, from the appliance. Point it towards the receiver on the air
conditioner. Communication is confirmed with a beep.
CAUTIONS
The air conditioner will not operate if curtains, doors or other materials block the signal from the remote control to
the air conditioner.
Avoid
o
Liquids
o
Direct Sunlight
o
Extreme Temperatures
If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function
properly.
If other electrical appliances react to the remote controller, either move these appliances or consult your local
dealer.
Replacing Batteries
The remote control is powered by two AAA alkaline batteries housed in the back of the remote. (Do not use
rechargeable batteries).
(1) Remove the cover by pressing down and sliding back.
(2) Remove the old batteries and insert the new batteries, observing polarity.
(3)
Replace the battery cover.
NOTE
:
When the batteries are removed, the remote control erases all settings. After inserting new batteries, the
remote control settings must be reselected.
Remote Control Specifications
Rated voltage
3.0V
Lowest operating voltage
2.4V
Signal receiving range
16 ft
Temperature range
23-140
︒
F
NOTE:
·
The remote control is a sending device only. The display on the control panel of the air conditioner will
indicate changes made by the remote control.
·
The illustrations in this manual are for explanation purposes only. The actual shape of remote controller may
be slightly different.
