Page 8
CHANGING TEMPERATURE SETTING
ADJUST FAN SPEED
SELECT HEAT MODE
(FOR TTW412AE230X & STW412AEZX)
Change Temperature:
Press or hold either Up (
▲
) or
Down (
▼
) button until the desired
temperature set point is seen on
the display.
Temperature range is 62°F (17°C)
to 86°F (30°C) in 1°F (1°C)
increments.
Display indicates set point
temperature in all modes except
"FAN ONLY" mode.
Select Fan Speed
Used to select the Fan speed in
four steps
–
o
Auto
o
Low
o
Med.
o
High
Each time the button is pressed,
the fan speed mode is shifted.
If the DRY mode is selected the
fan will operate in Low speed.
Heat Mode (Heat Model Only)
Press the Mode button to select
heat function.
Press
Up (▲) or Down (▼)
to
select temperature.
Fan Operation
o
The
fan will turn on 3 seconds
before the electric heaters are
turned on.
o
The fan will run for 15
seconds after the heater has
turned off when room
temperature is satisfied.
o
If the heater is off for more
than 10 minutes the fan will
turn on and run for 1 minute in
low speed to circulate room
air.
Press to raise
set point.
Press to lower
set point.
Press to select
appropriate fan
speed.
Press the Mode
button
– Select
heat.
