International Datacasting P56 Series, Руководство пользователя

Страница: 36 / 51

36
[MPEG-2 TS via RTP/UDP]
[MPEG-2 TS via ASI]
[MPEG-2 TS via *plain* UDP]
4.4.6. Decoder Channels
Here the settings for each channel can be done as described in the following
sections.
4.4.6.1. Audio output
Allows selection of the audio output.
Configuration options:[analog] [AES/EBU]
4.4.6.2. Output buffer[msec]
The P56x will be streaming with the defined delay.
4.4.6.3. Analog level offset[dB]
The device comes with a level adjustment of 6 dBu and a level offset of 0 dBu. The
gain can be set between -6 dBu and 6 dBu.
Configuration options:[-6] [-5.5]...[5.5][6]
4.4.7. Ancillary Data
Sets the transport mode and the baud rate of the ancillary data.
4.4.7.1. Transport mode
Selects the output path (transport mode) of the ancillary data. It can be embedded in
the MPEG-1 Layer
II
frame or the ancillary transport can be switched off.
Configuration options:[off] [embedded]
4.4.7.2. RS232 baud rate
Selects the baud rate of the ancillary data.
Configuration options:[1200] [2400] [4800] [9600] [19200]
4.5. P561 Encoder Configuration
The Configuration menu Codec supports the following settings: