Rev 2.1 11
Figure 2 - 1 Audio Configuration Page (Scrolled)
Aside from the Common Menu Items, the following menu items are available:
Menu Item
Description
Show
Selecting this button will always return you back to the Audio Configuration page, as shown in
Figure 2 - 1.
Edit
Selecting this button will enter the Edit Audio Configuration page, as shown in Figure 2 - 2.
The following fields can be edited on the Edit Audio Configuration page:
Edit Field
Description
Audio Player
Select from the pull down list the audio decoder to be used to decode the selected stream.
Multiple decoders must not be set to decode the same stream.
Type
The Type of audio data; choices are PES or IP.
Channel
Select from the available channels provided by the Channel Guide, or set as “User Defined”.
IP Address
The multicast address of the IP audio data stream (Type is IP audio only).
Port #
The associated UDP port address for the IP audio data stream (Type is IP audio only).
Interface
Select the source interface for the incoming audio stream, options are: sat0, eth0 and eth1.
Output Device
Select the device for audio output from CH1 (Pro Audio) through CH4 Pro Audio, or Livewire™1
– 4. (Note; only 2 Pro Audio and 2 Livewire devices are available in the 1R model).
Async Data Rate
Select the data rate for the RS232 compatible Metadata output (IP audio only).
PES PID
Select the number of the PID carrying the PES data (Type is PES audio only).
Note: With the Channel set to “User Defined” and Audio Type to IP, then all fields except PES PID # can be edited. If
the Audio Type is set to PES, then all fields except “IP Address” and “Port Number” can be edited.
