Intermec PW40A, Быстрый старт, Страница: 9 / 20

PW40A Printer Quick Start Guide
9
Table 1-3(continued)
Print-out Explanations
Self Test Description
Available
Fonts
“LOC” shows whether a font is Resident (R) or
Downloaded (D). “CPI” shows characters per
inch. “DESCRIPTION” describes the font.
“NAMES” give the “Easy Print” name, the Line
Printer name, and the hexadecimal equivalent of
that name.
Available
Graphics
“LOC” shows whether a font is Resident (R) or
Downloaded (D). “CPI” shows characters per
inch. “DESCRIPTION” describes the graphic.
“NAMES” give the “Easy Print” name, the Line
Printer name, and the hexadecimal equivalent of
that name.
Available
Bar Codes
All supported barcodes are displayed. “DE-
SCRIPTION” describes the graphic. “NAMES”
give the “Easy Print” name, the Line Printer
name, and the hexadecimal equivalent of that
name.
Card Read-
er Option
Shows the current Card Reader configuration.
Paper Loading
Out of Paper
The PW40A Printer sounds two quick beeps when it runs out of
paper. If the printer is out of paper, the printer suspends opera-
tion until paper is present and the lever is down. The printer
continues to communicate with the mobile computer as long as
it does not “time out.” Once the printer restarts, it finishes the
rest of the print job from where it left off.
Removing Paper Core from your PW40A Printer
1. Unsnap the latch and lift up the cover.
2. Wrap your index finger around the empty paper core and
pull up. The paper rod will snap out.
3. Remove the empty paper core and discard.