Intermec PW40A, Быстрый старт, Страница: 8 / 20

PW40A Printer Quick Start Guide
8
Printer Self Test
Push the red button and hold for about four seconds to print a
self test. Below is an explanation of the print--out.
Table 1-3
Print-out Explanations
Self Test Description
F/W Ver The internal software version (4.27 for printer,
1.09 or greater for card reader)
Timeout The seconds between printing and sleep mode.
Baud Rate The speed at which the printer receives data.
Parity Odd, Even, or None
Data Bits Matches with computer sending data to printer.
Handshake
The way the printer handles flow control from
host.
Burn Adj Amount of heat used to print on the thermal pa-
per.
Beeper
May be turned On or Off.
Batt Volt Current voltage of the battery pack.
Batt Temp Temperature of the battery.
Flash/RAM 1 Meg or 4 Meg Flash/ 1 Meg or 4 Meg RAM
Boot Ver-
sion
Boot sector firmware.
Prnhd Tmp Temperature of print head (between 0 and 50
degrees).
Infrared Not available at this time.
Device
Name
Shows type of device (i.e. PW40A)
Device
Nickname
Shows user name for printer.
IrDA* Ver
Not available at this time.