Intermec PW40A, Быстрый старт, Страница: 7 / 20

PW40A Printer Quick Start Guide
7
Table 1-1 (Continued)
LED Battery Indicators
LED Action State of Charge
Slow Orange
flashing
Timeout Restart charge
Fast Orange
flashing
Internal error Remove battery to power
down completely and re-
connect. Or unplug from
charging source, wait
15--20 seconds and re-
connect.
Table 1-2
Beep Indicators
Number of Beeps Indicates
One Printer has come out of sleep mode
Two
Printer is out of paper
Three Battery is low
One long beep No program in printer, only boot code
Determining Current Battery Power
To determine the current charge on the battery pack, print out
a self test by pressing and holding the red self--test button for
four seconds. If the battery is good, you will see the abbrevi-
ation for the word “GOOD” next to the Battery voltage print
out.
This printer has a built in low battery detector. When the
printer’s battery voltage is low, the printer beeps three times,
indicating a Low Battery Warning. This only happens if the
printer is awake.