Intermec PB50, Руководство пользователя

Страница: 23 / 102

Chapter 1 — Using the Mobile Printer
PB50 and PB51 Mobile Printer User Guide 11
Charging the Batteries
There are two ways to charge the battery:
• Connect AC power to the printer and charge the battery while it is
in the printer.
•
Charge the battery in the AC18 4-bay battery charger. For more
information, see
AC18 4-Bay Battery Charger Instructions .
It takes approximately six hours to charge the battery while it is
installed in the printer. To charge the battery inside the printer, you
need:
• an Intermec 12 VDC power supply (Model AE19).
• an AC power cord.
To charge the battery inside the printer
1 Install the battery in the printer. For help, see the previous section,
“Installing the Battery” on page 10 .
2 Connect the power supply to the DC power connector on the
printer.
3 Connect one end of the power cord to the power supply, and then
plug the other end into an AC outlet.
Understanding the Battery Icon
The easiest way to tell the status of your battery is to look at the
battery icon on the control panel of the printer.
Battery Icon Status
Icon Status
Battery is fully charged.
Battery has a medium charge. You should be able to work for
several more hours before charging or replacing the battery.
Battery is low. You need to replace the battery soon.
Battery is critically low. You need to replace the battery now.
Battery charging error. You may need to replace the battery.