Setup - MaxiScan 3010 input synchronization – setup options
40
MaxiScan 3010 - Installation Guide
MaxiScan 3010 input synchronization – setup options
Reading can be triggered by an external device (opto-coupled cell, automated
machine, electrical control device, etc.) connected to the MaxiScan 3010 or by a
message from the host system.
The Intermec photoelectric switch (P/N 3-500029-03) is fully compatible with the MaxiScan 3010 input
synchronization port.
Trigger event
Current on
Reading is active when current flows between the MaxiScan 3010
inputs SI+ and SI-. Reading remains active until the current stops
flowing.
Current off
Reading is active when no current flows between the MaxiScan
3010 inputs SI+ and SI-. Reading remains active until current starts
to flow.
Rising edge
Reading is triggered by a rising edge current between the MaxiScan
3010 inputs SI+ and SI-. Reading remains active until the input
synchronization timeout is reached.
Falling edge
Reading is triggered by a falling edge current between the
MaxiScan 3010 inputs SI+ and SI-. Reading remains active until the
input synchronization timeout is reached.
Rising or
falling edge
Reading is triggered by a rising or falling edge current between the
MaxiScan 3010 inputs SI+ and SI-. Reading remains active until
the input synchronization timeout is reached.
Software
Reading is triggered when the MaxiScan 3010 receives a start read
character from the host system. Reading remains active until a stop
read character is received.