4
Configuring the Adapter
After you attach the adapter, you need to enable the adapter.
1
Tap
Start > Settings > System > Intermec Settings > Data Collection >
Magstripe reader > Enable MSR
.
2
Tap
OK
. The computer is now configured to use the magstripe reader.
Understanding the Status LED
CK70/CK71 磁条阅读器适配器 (1001AA01) 说
明
配置 COM 端口
首次连接适配器之前，您需要先配置 COM 端口。
1
按 Start > Settings > System > Intermec Settings >
Communications > Serial Port Switch，然后选择 COM5 back
accessory。
2
当提示您保存并重新启动时，按 ok。
3
按 OK 保存。
Note:
When the magstripe reader is initially attached, the status
LED is solid for 3 seconds.
Blink Rate
Description
Solid for 3 seconds
Attached and ready for use
Blinks once every 3 seconds
Idle
Blinks 4 times
Card read successfully
5
6
Status LED
Содержание CK70 RFID
