Providing a brighter solution.™
Check Out and Troubleshooting
If it doesn’t
work
Reference/Procedure
Verify that
batteries are
installed
properly and
fully charged.
The Hand-Held Remote takes
3 AAA batteries. Make sure the
batteries are installed and are
properly aligned according to the
polarity markings in the battery
compartment.
Do not mix fully charged batteries
with partially charged batteries in
the Hand-Held Remote.
Do not use rechargeable batteries
in the Hand-Held Remote.
If the
Low Bat
indicator is
visible in the display, the Hand-
Held Remote will function
intermittently. Replace batteries
immediately.
1.
.
.
.
Verify that the
Hand-Held
Remote has
successfully
awakened
from its sleep
state.
Push any button on the Hand-
Held Remote to wake it from its
sleep state. Failure to awaken
means there will be nothing
visible on the display!
If the Hand-Held Remote is
awake and none of its buttons are
pressed, it should go back into its
sleep state after one minute.
1.
.