Providing a brighter solution.™
Install Panel-Mounted Transceiver
1
Connection for Sta-Rite Heaters
Turn off power to heater at main circuit
breaker panel.
Unbolt and remove the upper jacket
halves (Refer to heater owners manual).
Open control box cover.
Remove the factory-installed jumper
between the Fireman’s Switch terminals.
Connect two
#14 gauge
wires, designed
for use in hot
environments, to
the two black
wires, marked
heater
connection, on
the panel-
mounted
receiver in the I-Wave Control Center.
Attach the other end to the two spade
1.
.
.
.
5.