manualshive.com logo in svg

INTERLUBE AX1, Руководство по обслуживанию и ремонту

Поделиться
Скачать
INTERLUBE AX1 Скачать руководство пользователя страница 9

9

PROBLEM

POSSIBLE CAUSE

REMEDY

G. Incorporative injector causing 

1. Lube piston cannot dispense

1. Loosen the line fittings 

the pump to stall.

lubricant.

individually from the injectors. 
Actuate the 

MANUAL OVERRIDE

AX3 only

button to identify the 

stalled injector. Trace the line  
and check for:

A. Clogged bearing.
B. Crimped line.
C. Blocked line.

2. Lube piston is frozen.

2. Loosen the injectors individually 

from the pump body. Actuate 
the 

MANUAL OVERRIDE AX3 

only 

button to identify which 

injector frees the system. 
Replace the injector.
Check for contaminates in the 
reservoir. Replace the lubricant 
if contaminates are found.

H. Inoperative injector but the 

1. Return spring on the injector is

1. Secure the return spring to the 

pump is able to operate.

not attached.

lube piston and injector body.

2. Lube piston is missing.

2. Replace the injector.

3. Outlet check valve is not 

3. Remove and clean the injector. 

seating properly.

If this does not remedy the 
problem, replace the injector.

Check for contaminates in the 
reservoir. Replace the lubricant if 
contaminates are found.

I. Lubricant is coming out of the

Broken or severed line.

Refer to 

PROBLEM

“B – 1”.

tape / harness.

Содержание AX1





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды