manualshive.com logo in svg

INTERLUBE AX1, Руководство по обслуживанию и ремонту

Поделиться
Скачать
INTERLUBE AX1 Скачать руководство пользователя страница 3

3

2. GENERAL DESCRIPTION

A typical AX lubrication system includes the
following components:

• Pump with integral reservoir
• Lubricant injectors
• Tubing to the lubrication points
• Fittings at the lubrication points

The AX range has a radial manifold ranging from
12 to 84 ports, depending on the model. Each port
can be fitted with a positive displacement lubricant
injector. Each lubricant injector is dedicated to a
single lubrication point.

The lubricant injector is connected to the lube point
with tubing and a tube connector.
Numbered sleeves are placed on the tubing at both
the lubricant injector and lube point to assure
accurate installation and identification.

NOTE

Throughout this manual, whenever part names

are used, there will be a number following it in

parenthesis, i.e., reservoir paddle (10). 

The number is the reference used in 

section 7, Figures 3 & 4.

Six different lubricant injector output capacities
are available to match the lube point volume
requirements. Lubricant injectors are colour coded
for easy identification. Unused pump manifold ports
are plugged.

The AX pump is equipped with one or more cams
(17) that operate the lubricant injectors as the
cams(s) are rotated by the motor (42). 

1. INTRODUCTION

This manual gives instructions for operating,
maintaining, and servicing the Interlube AX
chassis lubrication system. Because of the
importance of providing the correct lubricant
amount to the moving parts of the equipment,
read this manual to become familiar with your
AX lubrication system.

Review and follow the procedures given before
attempting maintenance or service. Illustrations
are provided to aid in disassembly and
reassembly.

If there are questions not answered by this
manual, contact your Interlube distributor,
dealer, or Interlube direct.

Содержание AX1





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды