Interlogix WMC252-1W-1T-300 Скачать руководство пользователя страница 2

Страница: 2 / 93

Copyright

Interlogix is part of UTC Building & Industrial Systems, Inc. a unit of United
Technologies Corporation. All rights reserved.

Trademarks and

patents

The WMC252 Series name and logo are trademarks of United Technologies.

Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.

Manufacturer

Interlogix

3211 Progress Drive, Lincolnton, NC 28092 USA

Authorized EU manufacturing representative:
UTC Climate Controls & Security B.V.,
Kelvinstraat 7, 6003 DH Weert, Netherlands

Intended use

Use this product only for the purpose it was designed for; refer to the data sheet

and user documentation for details. For the latest product information, contact

your local supplier or visit us online at www.interlogix.com.

Certification

N4131

ACMA compliance

Notice!

This is a Class B product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

European Union

directives

2004/108/EC (EMC Directive):

Hereby,

UTC Building & Industrial Systems, Inc.

declares that this device is in compliance with the essential requirements and

other relevant provisions of Directive 2004/108/EC.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his/her own

expense. Any changes or modifications not expressly approved by UTC could void the user’s

authority to operate this equipment under the rules and regulations of the FCC.

FCC Caution:

To assure continued compliance, (for example, use only shielded interface cables when connecting

to computer or peripheral devices) any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Содержание WMC252-1W-1T-300






























































































Результаты поиска

Содержание WMC252-1W-1T-300

Отзывы:

Похожие инструкции для WMC252-1W-1T-300

Бренды по названию

Популярные бренды

Interlogix WMC252-1W-1T-300, Руководство пользователя

Результаты поиска

Содержание WMC252-1W-1T-300

Отзывы:

Похожие инструкции для WMC252-1W-1T-300

Бренды по названию

Популярные бренды