Interlogix TVR-1004-1T, Руководство пользователя

Страница: 83 / 109

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 79
2. Enter a Tour Number.
You can define up to 16 different preset tour sequences. Each preset tour
sequence is comprised of preset points, and each preset point includes a
preset position, dwell, time, and speed.
3. Define a preset point.
For each preset point, enter a cruise point number, preset number, dwell time,
and dwell speed. Select Add to create that new cruise point.
4. Click Confirm to save that preset point into the sequence.
5. Repeat steps 3 to 4 for additional preset points.
6. Click StartSeq to check the tour sequence. The preset tour sequence runs To
stop the preset from running, click Stop.
7. To delete a preset point, specify the preset point number on the Delete Preset
section of the screen and click Delete.
8. When finished defining a preset tour sequence, click Return to return to the
PTZ screen.
9. Click Confirm on the PTZ screen to save your changes.
Shadow tour
The shadow tour function recalls the PTZ movement track. Make sure your PTZ
supports the shadow tour function before you configure your shadow tours.
Use the Shadow Tour Setup screen to define shadow tours. To display the
Shadow Tour screen, click Shadow Tour Setup
Note: The instructions below do not cover all PTZs.
To define a shadow tour:
1. Click Shadow Tour Setup on the PTZ screen to display the Shadow Tour
Setup screen.
2. Click Rec to display the PTZ control interface.
3. Use the directional arrow buttons to control the PTZ camera movement.
4. Click anywhere in the screen to save the operation track and return to the
Shadow Tour Setup screen.
5. Click Start to view the PTZ movement track. Click Stop to stop the preview.
6. Click Return to return to the PTZ screen.
7. Click Confirm on the PTZ screen to save your changes.