Interlogix TVR-1004-1T, Руководство пользователя

Страница: 76 / 109

Chapter 5: Advanced setup
72 TruVision DVR 10 User Manual
Option Description
Advanced settings Specifies the advanced IP settings. See “Advanced IP settings” below for
more information.
Advanced IP settings
Table 20 below describes the advanced IP settings.
Table 20: Advanced IP settings
Option Description
Mac Specifies the physical address of the device. This value can not be
overwritten.
NIC type Specifies the NIC type. Default is 10M/100M Auto. Other options
include: 10M Half-Dup, 10M Full-Dup, 100M Half-Dup and 100M
Full-Dup.
IP server address Use this option if the TVR 10 is utilizing the PPPoE function, and
retrieves one dynamic IP address. If you define the DNS IP with one
fixed Internet IP address, the TVR 10 sends information such as
TRV10 name, serial number, and current IP address to that fixed IP
address. The fixed IP address is referred to as the DNS IP. The
DNS server with that fixed Internet IP address can receive the TVR
10 information and be used to resolve the TRVR10 dynamic IP
address. This IP server is a unique software and does not fall into
the normal domain name server. You can use the SDK provided to
develop this DNS software.
Multicast IP Specifies a D-class IP address between 224.0.0.0 to
239.255.255.255. You do not need to specify this option if you are
not using the multicast function. Some routers prohibit the use of
multicast function in case of a network storm.
Remote Host IP and Port If an alarm and exception occur, the TVR 10 sends information to
the host IP you specify in this option. The site that has this IP can
remotely receive the alarm and exception information from the TVR
10.
PPPoE setup
Use the PPPoE Setup screen (shown in Figure 28 on page 73) to define settings
for the PPPoE function.