Interlogix TVR-1004-1T, Руководство пользователя

Страница: 59 / 109

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 55
4. Define the motion detection area.
Move the pointer or use the directional arrow buttons (Up, Down, Left, or
Right) to move the yellow pane to the zone you want to mask. Click to select
that area for motion detection. The yellow panes turn red, indicating an alarm
will trigger if motion is detected within this area. Drag the mouse or use the
directional arrow buttons to extend or shrink the motion detection area.
5. Click in the red area to save that area for motion detection and return to the
yellow pane to continue defining areas as shown in the figure below.
6. Repeat steps 4 to 6 for additional motion detection areas. You can set up four
masked areas on a screen.
7. To clear part of a motion detection area, move the yellow pane to the motion
detection area you want to delete and press REC. To clear all motion
detection zones, press #.
8. Click the mouse to return to the Camera Configuration screen.
To define the motion alarm response rules:
1. Display the Motion Detection Alarm Rules screen.
Click Motion Detection Rules to display the Motion Rules dialog screen as
shown in the figure below.