Interlogix NXG-4 Скачать руководство пользователя страница 50

Страница: 50 / 170

xGen Lite Installation and Programming Guide

The menu bar is located along the bottom of the app. Touch the Zones icon (last
icon with a dot and wireless signals) to view zone status.

• Touch Bypass to ignore a zone or touch it again to restore it to normal

operation.

• Touch Chime to add or remove a zone from the Chime feature.

• Touch Notify to receive push notifications when there is activity from that

zone.

Touch the Camera icon to view cameras connected to your system.

Live snapshots from each camera will be shown.

• Touch the snapshot to open the live stream in full screen. Rotate your device

to make the image bigger. Touch the screen then Back to return to the
Camera screen.

• Touch the Play button under each camera to view the last recorded clip by

that camera. Touch the Share button to save or forward the clip.

Содержание NXG-4











































































































































































Результаты поиска

Содержание NXG-4

Отзывы:

Interlogix NXG-4, Инструкция по установке и программированию, Страница: 50 / 170

Результаты поиска

Содержание NXG-4

Отзывы: