Interlogix NXG-4, Инструкция по установке и программированию, Страница: 17 / 170

xGen Lite Installation and Programming Guide 5
Onboard outputs:
NXG-4 4: bell, strobe, siren and power outputs
NXG-8, NXG-9 5: bell, strobe, siren and power outputs
Maximum output number 32
Maximum action number 32
Partitions:
NXG-4 4
NXG-8, NXG-9 8
Maximum keypad:
NXG-4 16
NXG-8, NXG-9 24
Maximum expander modules, incl keypads:
NXG-4 24
NXG-8, NXG-9 32
Non-volatile Memory
Event log capacity 1024
Data retention (log, program settings) 10 years
Ethernet Connection (IP only)
Supported standard IEEE 802.3u
Speed 10BASE-T or 100BASE-TX
Duplex Half-duplex and full-duplex
Cabling FTP (foiled twisted pair) Cat 5e cable or better
xGenLite Bus
Type 4 wire RS485 bus
High common mode tolerance (25V)
Capacity Up to 32 devices
Range 800m
Recommended Cable Belden 7201A, 3107A or 9842, 2 pair twisted
shielded data cable or exact equivalent (see
“Cable Requirements” on page 18)
Current Consumption
Product Main description Current Consumption
(non-alarm) Current
Consumption (alarm)
NXG-8, NXG-9 8 zone panel 130 mA typical 130 mA typical
NXG-4 4 zone panel 130 mA typical 130 mA typical
NXG-1820 Touchscreen keypad 100 mA typical, 40 mA in
idle mode 175 mA max with
sounder and screen on
max brightness