Interlogix NXG-4 Скачать руководство пользователя страница 103

Страница: 103 / 170

xGen Lite Installation and Programming Guide

• Export control panel information for use with USBNav – on the Control Info

tab click Create file to save current panel programming to a special file. This
file can be copied to a USBUp and then inserted into a xGenLite system to
program it without a computer.

Download Menu

This menu allows you to:

• Initiate a connection to the panel.

• Disconnect from a panel.

• Read all programming, including all connected expansion devices and backup

copies where available.

• Send all programming to the panel.

• Read the event log.

• Initiate a callback session before download, where this feature is enabled on

the panel.

• Write programming to a NX-586 / NX-588. This allows on-site programming of

selected panels without the need for a computer.

• Read programming from a NX-586 / NX-588. This allows retrieval of panel

programming from selected panels on-site without the need for a computer.

• Enable auto-answer for callback.

Содержание NXG-4











































































































































































Результаты поиска

Содержание NXG-4

Отзывы:

Interlogix NXG-4, Инструкция по установке и программированию, Страница: 103 / 170

Результаты поиска

Содержание NXG-4

Отзывы: